Image 1 Image 2 Image 3 Image 4

Bathtub Drain Repair

Find a great small bathtub for your bathroom. Learn about what to look for first.

No matter what type of bathtub you have, eventually you’re going to need some type of bathtub drain repair at some point during the lifespan of your tub.  That’s simply because they really just aren’t built to last, and you put them through quite a bit of grief, just with ordinary daily usage. But there are plenty of DIY bathtub drain repair methods that you can try out when you are looking to work on yours, so that you can get it up and running regularly once more.  With the right type of repair system, you can be sure that you’re able to get just about anything flowing freely again, and there are quite a few tricks that apply here.

First off it’s really important to assess the damage, by knowing which sort of drain you actually have.  This is really important for the fixing of your drain, so that you know how to go about actually getting the blockage cleared.  That means one of the first things that you want to do is determine whether you have a lever lift, or manual lift drainage plug.  With a lever lift, you have to completely disassemble the lever and pull it out in order to get the drain clear.  But with a manual, you literally just pick the stopper up and out of the drain, and you’re good to go.  This way, you can be sure that the drain is clear of mechanical obstructions, which can be a problem in and of itself.

From there, you really want to assess what type of bathtub drain repair methods you should undertake next, based upon how your drain is running.  If the drain is running just a bit slow, you want to use boiling hot water to actually loosen things up inside the drain.  That is best done by boiling a kettle full of water, or even through using the right type of electric kettle.  This way, you have extremely hot water that you can pour out a very small spout to target it right down the drain.  The key here is for it to be piping hot, so that it literally burns off and loosens debris so that it goes right back down the drain, and virtually clears up for you almost automatically.

Of course, when you’re looking for the right type of bathtub drain repair solutions, you also want to be wary of things that are going to do more damage. Typically repairing your drain on the DIY level, should only be done with boiling hot water, and no chemicals whatsoever.  While there are chemicals like Drano out there, that are able to totally break up things in the drain, they are actually bad in the long run.  The chemicals that are used to break up the drain cloggers, actually crystallize further down the pipe, leading to more blockages.  Eventually, after using Drano enough, you’re going to find that there’s just no way to get rid of the problem without calling a plumber.

But remember that sometimes it’s just good to go to a plumber for bathtub drain repair anyways.  Through sites like you can find just about any plumber operating in your area very easily, so that you can get the job done right away, the right way.